PRODUCTS

Apply to：Binding tape、Ring belt、Trailer belt、Hoisting belt waiting for coiling and cutting！

1.This machine use Taiwan Delta group PLC program control 12 axle（on behalf of 12 motors），12-inch large display screen，Various functions on the device can be operated at will！

2.12-inch Chinese and English touch display screen！

3.Conveying table mainly is to put plane wound material send to the designated location，Non-loose flat push！

4.This equipment belong to two independent “all-in-one machine for cutting reeling and packing combination”，The production capacity is higher than that of conventional equipment increase by 2 times，The length of the cut product、high speed accuracy，This machine is equipped with assembly line automatic feeding material、Material collocation function，The cut ribbon can be rolled up automatically Automatic packing completion Automatic delivery to the conveyer table。Save labor（1:4）！

5.Hot cutting tool，Two independent cutters，Upper and lower double knife type！

6.Two rollers（can be operated separately），Second set of feeding material、Cut the band、Roll tape function simultaneous operation，But the length of a single set can operate independently（Support for asynchronous work），Make full use of the characteristics of two independent functions of one equipment，Two sets of pulling hands，Four sets of rolls work independently，A set of conveying lines！

7.The configuration of this device clamping manipulator each group of parts use machine tool to finish workpiece，Stable quality and wear resistance，More beautiful appearance，The supporting operation is smoother and more durable（The first generation equipment configuration is adopted laser cutting parts + drilling and tapping，unstable in the course of use，poor wear resistance ）！

8.The configuration of this device packing manipulator use 360°rotating cylinder+bearing，Frequently gripping material speed more sensitive，Stability increase 58%，Will not appear without reason slip or can`t grab material problems of。（First generation pack manipulator use telescopic cylinder + rack，Frequently in use appear various unstable hidden danger）！ 

9.This equipment to configure Four roll heads，Be equal to on a machine two roll heads intermittent run and single time run that will do，Mainly take cut off taps from the middle winding get up，Take two heads incision stay outside,Convenient operator can direct pick up a reel of webbing both ends direct sewing。（Automatic packing and not automatic packing can optional）。Special note：Take automatic packing machine tape coiling external diameter maximum 20cm of。Not automatic packing machine tape coiling external maximum 40cm of！

10.Use import SKD11 knife，Cutting different materials webbing of，Cutter hours of、Frequency all are ok arbitrarily adjust，Cut it product have No blackening、No scorching、Not scattered、Seal effect excellent。For customers omit drag length sling time`s hard work，Time-consuming and Laborious status of，Main 85% save of area covered！

Feeding material

1.In feeding material in the process，Use Germany technology digital length meter  calculation length，When the webbing forward and back off automatic memory and distinguish length！

2.Webbing required external diameter size，It can be adjusted by changing the size of the roll head，Multi-function use！

3.When the equipment is in automatic coiling ，Clamping head will return to the starting point immediately，Wait for the start of the next station，Effective time saving，Improve work efficiency！

4.Equipment use intelligence feeding material，Ensure cut up webbing length the error is very small，Increase accuracy！

5.This machine is suitable for rolling and cutting 1 inch, 1.5 inch, 2 inch, 3 inch, 4 inch and other types of webbing.

Speed:

The continuous winding speed is 300 meters per minute, 0-9 gears (the speed can be adjusted at will). For example, if the calculation is based on two inches of webbing, two pieces are rolled and cut at the same time/two pieces are automatically packed, and five pieces are cut in one minute=10 pieces (calculated by 10.5M length).

Roll cutting specification:

1. The width of rolled and cut webbing is 25mm (above medium thickness) - 100mm, and the thickness is 2mm - 6mm.

2. Cut-off mode: hot cutting (heating of heating tube) pneumatic push (double knife).

3. Winding mode, horizontal type: the diameter of the reel (winding belt) is 12cm-25cm, and the diameter of the winding head is 4cm-12cm.

4. The operation mode of the coil head is 5.5KW servo motor, and the material pushing mode is pneumatic.

5. The rear material feeding device is a 1.5KW servo motor.

6. Automatic feeding, self-made manipulator, step drive.

7. The discharge mode is pneumatic and self-made conveyor belt.

8. Automatic packaging mode: the packaging speed is automatically adjusted in real time, and the speed and rhythm of the winding belt are fully matched. The width of the packaging belt is 0.5cm (saving half the cost for the customer's normal 1cm packaging belt).

9. The clamping diameter of the clamping manipulator is 20cm.

devise

1. During the feeding process of the machine, the feeding rack can be lifted and lowered at will, which reduces the inconvenience of manual operation. The design of the machine conforms to the ergonomic principle.